Colorado 2WD V8-5.3L (2009)
Fuel Filler Neck: Service and Repair
Fuel Tank Filler Pipe Housing Replacement
Removal Procedure
1. Open the fuel filler door.
2. Remove the fuel cap.
3. Remove the fuel filler hose. Refer to Fuel Tank Filler Hose Replacement ().
4. Remove the screws from the fuel filler pocket.
5. Remove the fuel filler pocket from the vehicle.
Installation Procedure
1. Align the fuel filler pocket to the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the screws to the fuel filler pocket and tighten to 10 Nm (89 lb in).
3. Install the fuel filler hose. Refer to Fuel Tank Filler Hose Replacement ().
4. Install the fuel cap.
5. Close the fuel filler door.
