Colorado 2WD V8-5.3L (2009)
1. Slide the inflatable restraint steering wheel module coil onto the steering column.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the inflatable restraint steering wheel module coil bolts.
Tighten the bolts to 4.5 Nm (40 lb in).
3. Route the wiring harness assembly down the steering column.
4. Connect any electrical connectors as needed.
5. Install the wire harness straps to the wire harness assembly.
6. Remove the centering tab from the inflatable restraint steering wheel module coil, if equipped.
7. Install the steering column trim covers. Refer to Steering Column Trim Cover Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Trim Cover Replacement).
8. Install the steering wheel. Refer to Steering Wheel Replacement (See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Steering Wheel Replacement).
9. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Air Bag(s) Arming and Disarming/Service and Repair).
