Colorado 2WD V8-5.3L (2009)
1. Position the rear center seat belt assembly on the floor panel.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the bolt which retains the rear center seat belt assembly to the floor.
Tighten the rear center seat belt bolt to 52.5 Nm (39 lb ft).
3. Route the rear center seat belt webbing up through the guide loop. Ensure that the seat belt webbing is not twisted.
4. Install the body rear trim panel. Refer to Body Rear Trim Panel Replacement (Crew Cab) (See: Body and Frame/Interior Moulding / Trim/Trim
Panel/Service and Repair)Body Rear Trim Panel Replacement (Regular Cab) (See: Body and Frame/Interior Moulding / Trim/Trim
Panel/Service and Repair)Body Rear Trim Panel Replacement (Extended Cab) (See: Body and Frame/Interior Moulding / Trim/Trim
Panel/Service and Repair).
5. Install the rear seat shoulder belt guide cover.
