Colorado 2WD V8-5.3L (2009)
Power Door Lock Switch: Service and Repair
Door Lock Switch Replacement - Driver Door
Door Lock Switch Replacement - Driver Door
Removal Procedure
1. Remove the 2 screws securing the switch plate assembly to the door trim panel.
2. Lift the front of the switch plate up to disengage clip.
3. Remove the switch plate out of the door trim panel opening.
4. Disconnect the electrical connectors (3, 4) from the switches (2, 5).
5. Remove the switch plate assembly (1) from the vehicle.
6. If replacing only the switches, remove the switches from the plate.
7. If replacing only the switch plate, retain the switches for transfer.