Colorado 2WD V8-5.3L (2009)
1. Install the generator bracket.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the generator bracket bolts and tighten to 50 Nm (37 lb ft).
3. Position the engine wiring harness bracket to the generator bracket.
4. Install the engine wiring harness bracket bolt (4) and tighten to 40 Nm (29.5 lb ft).
5. Install the drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement (See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts,
Brackets and Accessories/Idler Pulley/Service and Repair).
6. Install the power steering pump. Refer to Power Steering Pump Replacement (LLV, LLR) (See: Steering and Suspension/Steering/Power
Steering/Power Steering Pump/Service and Repair)Power Steering Pump Replacement (LH8) (See: Steering and Suspension/Steering/Power
Steering/Power Steering Pump/Service and Repair).
7. Install the generator. Refer to Generator Replacement (LLV/LLR) (See: Generator Replacement)Generator Replacement (LH8) (See: Generator
Replacement).
