Colorado 2WD V8-5.3L (2009)
5. Install the absorber/spring assembly to the vehicle.
6. Install the absorber/spring assembly bolt and nut and tighten to 110 Nm (81 lb ft).
7. Install the front stabilizer link. Refer to Stabilizer Shaft Link Replacement (ZQ8, Z85) (See: Stabilizer Bar/Stabilizer Link/Service and
Repair/Front Suspension/Stabilizer Shaft Link Replacement (ZQ8, Z85))Stabilizer Shaft Link Replacement (Z71) (See: Stabilizer Bar/Stabilizer
Link/Service and Repair/Front Suspension/Stabilizer Shaft Link Replacement (Z71)).
8. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
9. Lower the vehicle.
