Colorado 2WD V8-5.3L (2009)
1. Position the transmission range selector cable bracket to the transmission.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the transmission range selector cable bracket bolts and tighten to 25 Nm (18 lb ft).
3. Install the range selector cable (2) to the range selector cable bracket. Ensure the range selector cable retaining tabs fully engage the range selector
cable bracket.
4. Install the retainer (1) to the range selector cable (2).
5. Connect the range selector cable end (3) to the transaxle range switch lever.
