Colorado 2WD V8-5.3L (2009)
6. Using the J 8614-01 - tool to hold the pinion nut, remove the pinion nut and the washer.
Note: Use a container in order to retrieve the lubricant.
7. Using the J 8614-01 - tool (1) to hold the pinion yoke, remove the pinion yoke by turning the J 8614-3 (3) clockwise.
Note: Do not damage the housing.
8. Using a suitable tool, remove the pinion oil seal.
Installation Procedure
1. Using the J 33782 - installer for the 8.0 inch, install the pinion seal.
2. Apply sealant to the splines of the pinion yoke. Refer to Adhesives, Fluids, Lubricants, and Sealers (See: Specifications/Fluid Type
Specifications).
