Colorado 2WD V8-5.3L (2009)
Transmission Mount: Service and Repair
Transmission Mount Replacement (RPO Z85 and ZQ8)
Transmission Mount Replacement (RPO Z85 and ZQ8)
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Support the transmission with a transmission jack.
3. Remove the two nuts (1) securing the transmission mount to the transmission support.
4. Raise the transmission off of the transmission support.
5. Remove the mount to transmission bolts.
Installation Procedure
