Colorado 4WD L4-2.9L (2008)
3. With an assistant, lower the rear door down onto the body side hinge straps.
4. Install the bolts (1) retaining the rear door hinge keeper straps.
Tighten the hinge keeper strap bolts to 25 N.m (18.4 lb ft).
5. Connect the rear door wiring harness connectors, and install the rear door wiring harness grommet to the body. Refer to Rear Side Door Wiring
Harness Replacement (See: Service and Repair) .
6. Install the bolt retaining the rear door check link to the body.
Tighten the bolt to 25 N.m (18.4 lb ft).
7. Inspect the door for proper operation and alignment. Refer to Rear Door Adjustment (See: Adjustments) .
