Colorado 4WD L4-2.9L (2008)
7. Connect the power steering hose assembly to the steering gear. Refer to Power Steering Gear Inlet and Outlet Hose Replacement (See: Power
Steering/Power Steering Line/Hose/Service and Repair) .
8. Install the engine protection shield, if equipped. Refer to Engine Protection Shield Replacement (See: Body and Frame/Frame/Skid Plate/Service
and Repair) .
9. Install the outer tie rod end to the steering knuckle. Refer to Rack and Pinion Outer Tie Rod End Replacement (See: Tie Rod/Tie Rod
End/Service and Repair) .
10. Install both of the front tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair) .
11. Lower the vehicle.
12. Bleed the power steering system. Refer to Power Steering System Bleeding (See: Power Steering/Power Steering Bleeding/Service and Repair) .