Colorado 4WD L5-3.5L VIN 6 (2005)
Trailer Hitch: Service and Repair
Trailer Hitch Replacement
Removal Procedure
1. Remove the bumper bracket.
2. Remove the hitch bolts from the frame.
3. Remove the hitch from the vehicle.
Installation Procedure
1. Install the hitch to the vehicle.
NOTE: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners
requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use
paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint
clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid
damage to parts and systems.
2. Install the hitch bolts to the frame.
Tighten
Tighten the bolts to 100 N.m (74 lb ft).
3. Install the bumper bracket.
