Colorado 4WD L5-3.5L VIN 6 (2005)
Hood Latch Release Cable: Service and Repair
Hood Latch Release Cable Replacement
Removal Procedure
1. Remove the grille.
2. Remove the hood latch.
3. Release the hood latch release cable from the hood latch assembly.
4. Attach a length of mechanic's wire to the exterior end of the cable, and note the routing of the cable for later installation.
5. Release the retainers securing the cable to the inner fender and the radiator support.
6. Push the cable grommet (1) through the cowl panel and into the interior of the vehicle.
