Colorado 4WD L5-3.5L VIN 6 (2005)
Turn Signal Switch: Service and Repair
Multifunction Turn Signal Switch Housing Replacement
Multifunction Turn Signal Switch Housing Replacement
Removal Procedure
1. Caution: Refer to SIR Caution in Service Precautions.
Disable the SIR system.
2. Remove 2 washer head screws from the switch mounting plate. Slide the switch mounting plate from the steering column shaft.
Installation Procedure
1. Slide the switch mounting plate onto the steering column shaft.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install 2 washer head screws into the switch mounting plate.
Tighten the screws to 2.5 Nm (22 inch lbs.).
3. Enable the SIR system.
