Colorado 4WD L5-3.5L VIN 6 (2005)
6. Remove the connector position assurance (CPA) (3) from the side impact sensor yellow 2-way connector (5) located near the middle of the door.
7. Disconnect the side impact sensor yellow 2-way connector (5) located near the middle of the door.
8. Remove the trim panel.
9. Remove the connector positive assurance (CPA) from the seat belt pretensioner - left connector.
10. Disconnect the seat belt pretensioner - left connector from the vehicle harness connector.
11. Remove the garnish molding.
12. Disconnect the roof rail module connector (1) from the vehicle harness.
ENABLING PROCEDURE
1. Remove the key from the ignition.