Colorado 4WD L5-3.7L (2007)
3. Insert a new retainer (3) into the clutch master cylinder push rod (1).
4. Push the clutch master cylinder push rod (1) onto the clutch pedal pin to secure.
5. Connect the electrical connectors (2, 4) to the following components:
^
The clutch pedal position switch (1)
^
The cruise control release switch (3)
6. Adjust the clutch release switch. Refer to Clutch Pedal Cruise Control Release Switch Adjustment.
7. Adjust the clutch pedal position switch. Refer to Clutch Pedal Position Switch Replacement.
8. Check for proper clutch pedal movement and operation.