Colorado 4WD L5-3.7L (2007)
2. Install the yoke flange to the front output shaft.
3. Lightly lubricate the NEW yoke flange O-ring seal with transfer case fluid.
4. Install the yoke flange O-ring seal.
5. Install a NEW yoke flange nut.
Notice: Refer to Fastener Notice.
6. Attach the J 8614-01 to the yoke flange.
Tighten the yoke flange nut to 137 N.m (101 lb ft).
7. Using a suitable punch, stake the yoke flange nut in 2 places.