Colorado 4WD V8-5.3L (2010)
Door Lock Cylinder: Service and Repair
Endgate Lock Cylinder Replacement
Endgate Lock Cylinder Replacement
Removal Procedure
1. Remove the endgate cover. Refer to Pickup Box Endgate Latch Cover Replacement ().
2. Disconnect the clip (1) retaining the lock rod to the lock cylinder.
3. Remove the lock rod from the retaining clip (1).
4. Remove the bolt retaining the lock cylinder to the endgate handle.
5. Remove the lock cylinder from the endgate handle.
Installation Procedure
1. Code the new lock cylinder. Refer to Key and Lock Cylinder Coding (See: Powertrain Management/Ignition System/Sensors and Switches -