Colorado 4WD V8-5.3L (2010)
8. Close the hood.
9. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
Windshield Side Reveal Molding Replacement
Windshield Side Reveal Molding Replacement
Removal Procedure
1. Open the doors
2. Partially remove the auxiliary weatherstrip (2).
3. Gently pry the reveal molding (1) from the top working towards the air inlet panel.
4. Release the reveal molding from the pinchweld flange.
5. Remove the reveal molding from the windshield pillar.
Installation Procedure
