Corsica L4-121 2.0L (1988)
Front Door Hinge: By Symptom
Technical Service Bulletin # 8841010
Date: 890401
Door - Front Hinge Pin Breakage
Number:
88-410-10
Section:
10
Date:
APRIL, 1989
Subject:
FRONT DOOR HINGE PIN BREAKAGE
Model and Year:
1987-88 L-CARS
TO:
ALL CHEVROLET DEALERS
This bulletin cancels and replaces Dealer Service Bulletin 88-32 (Section 10) dated July, 1987, to increase labor time allowance. All copies of 88-32
should be discarded.
1987-88 Beretta, Corsica's that have been diagnosed as having a broken door hinge pin should be repaired by replacing both of the door hinges on the
door of the vehicle that is affected.
New door hinges have been released and are available for these repairs as follows:
Hinge Asm. - Front Door Upper, P/N 10092242-3 (Right - Left) Hinge Asm. - Front Door Lower, P/N 10092244-5 (Right - Left)
The hinge replacement procedure is outlined in the Corsica/Beretta service manuals.
While replacing door hinges, the painted surfaces of the door and fender should be protected by tape. The door should be supported during removal and
reinstallation by a helper and floor jack, with appropriate protection applied to the lift pad of the jack.
Use Labor Operation:
T1243 Both Hinges, Right Front Door
1.1 Hours
T1244 Both Hinges, Left Front Door
1.1 Hours.
ADD:
Hinge Refinish and Material
Allowance G B
.4 Hours
Time includes door alignment.
Technical Service Bulletin # 8841010
Date: 890401
Door - Front Hinge Pin Breakage
Number:
88-410-10
Section:
10
Date:
APRIL, 1989
Subject:
FRONT DOOR HINGE PIN BREAKAGE
Model and Year:
1987-88 L-CARS
TO:
ALL CHEVROLET DEALERS
This bulletin cancels and replaces Dealer Service Bulletin 88-32 (Section 10) dated July, 1987, to increase labor time allowance. All copies of 88-32
should be discarded.
1987-88 Beretta, Corsica's that have been diagnosed as having a broken door hinge pin should be repaired by replacing both of the door hinges on the
door of the vehicle that is affected.
New door hinges have been released and are available for these repairs as follows:
Hinge Asm. - Front Door Upper, P/N 10092242-3 (Right - Left) Hinge Asm. - Front Door Lower, P/N 10092244-5 (Right - Left)
The hinge replacement procedure is outlined in the Corsica/Beretta service manuals.
While replacing door hinges, the painted surfaces of the door and fender should be protected by tape. The door should be supported during removal and
reinstallation by a helper and floor jack, with appropriate protection applied to the lift pad of the jack.