chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Valve Guide > < Rocker Arm Cover - Left|Page 1620
Page 2
background image

10. Throttle, T.V., and cruise cables. Refer to Components / Accelerator Controls, Engine Compartment under Throttle Cable/Linkage. See:

Powertrain Management/Fuel Delivery and Air Induction/Throttle Cable/Linkage/Locations

11. Necessary electrical wiring to plenum. Refer to Vehicle / Locations / Connectors / Pictorial Views for harness locations. See:

Locations/Connector Locations

12. Coolant hoses to throttle body.
13. Ignition wire harness.
14. Ignition wire guide.
15. EGR tube at crossover pipe.
16. Airflow tube.
17. Vacuum hoses to plenum.
18. Fill with coolant. For additional procedures refer to Cooling System / Service and Repair / Draining and Refilling. See: Cooling

System/Service and Repair

19. Negative battery cable and tighten bolt to 15 Nm (11 lb. ft.).Refer to Fuel Delivery and Air Induction / Service and Repair / Idle Learn

Procedure. See: Powertrain Management/Fuel Delivery and Air Induction/Service and Repair

20. Air cleaner assembly. 
21. Inspect for proper fluid levels and for oil leaks.

Valve Guide > < Rocker Arm Cover - Left|Page 1620