Corsica V6-3100 3.1L MFI VIN M (1994)
Fuel Pressure Test Port: Service and Repair
Fuel Rail Assembly (Exploded View)
NOTE: The fuel pressure connection is non-replaceable, but is serviceable.
REMOVAL:
1.
Disconnect the negative battery cable.
2.
Relieve the fuel system pressure.
3.
Using a standard valve core removal tool, remove the valve core assembly, and discard it.
INSTALLATION:
1.
Using the standard valve core tool, install the new valve core assembly.
2.
Connect the negative battery cable.
3.
Turn the ignition switch ON for two seconds, then turn it OFF for ten seconds. Again turn the ignition ON and check for fuel leaks.