Corsica V6-3100 3.1L MFI VIN M (1994)
6. Drive axle to transaxle.
7. Left side suspension support.
8. Left side stabilizer bar to control arm.
9. Left side ball joint.
10. Connect left side ABS wheel speed sensor.
11. Left side splash shield.
12. Left front tire and wheel assembly.
13. Lower vehicle.
14. Remove engine support fixture, J 28467-360.
15. Park/Neutral position switch.
16. Negative battery cable.
Transaxle Mount
TRANSAXLE MOUNT
TOOL REQUIRED
^
J 28467-A Engine Support Fixture
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Install engine support fixture, J 28467-A.
3. Raise vehicle and suitably support.
4. Left front tire and wheel assembly.
5. Left front splash shield.
6. Transaxle mount to body fasteners.
7. Transaxle mount to transaxle fasteners.
INSTALL OR CONNECT
1. Mount into position.
2. Transaxle mount to transaxle fasteners.
3. Transaxle mount to body fasteners.
4. Left front splash shield.
5. Left front tire and wheel assembly
6. Lower vehicle.
7. Remove engine support fixture.
8. Negative battery cable.