Corsica V6-3100 3.1L MFI VIN M (1994)
Clutch Slave Cylinder: Service and Repair
REMOVE OR DISCONNECT
1. Air intake duct from the air cleaner.
2. Negative and then the positive battery cable from the battery.
3. Left fender brace.
4. Battery hold down clamp bolt and remove the battery.
5. M.A.T. and M.A.F sensor leads.
6. PCV pipe retaining clamp from air intake duct.
7. Clamp retaining the air intake duct to the throttle body.
8. Air cleaner bracket and M.A.F. sensor mounting bolts.
9. Air cleaner, M.A.F. sensor and air intake duct as an assembly.
10. Electrical lead at the washer bottle, attaching bolts and washer bottle
11. Cruise control mounting bracket retaining nuts from the strut tower (if equipped).
12. Sound insulator from inside the vehicle
13. Clutch master cylinder pushrod from the clutch pedal.