Corsica V6-3100 3.1L VIN M SFI (1996)
1. Lubricate rubber parts with clean brake fluid to ease assembly.
2. Lubricated secondary seal, primary seal and spring retainer onto secondary piston.
3. Secondary piston spring and secondary piston assembly into cylinder bore.
To ease reassembly, lubricate with clean brake fluid.
4. Lubricated primary piston into cylinder bore.
5. Piston retainer while depressing primary piston.
6. Proportioner valve assemblies and fluid level switch.
7. Master cylinder reservoir diaphragm into reservoir cover and install on master cylinder reservoir.
8. Master cylinder.