Corsica V6-3100 3.1L VIN M SFI (1996)
Spark Plug Wire: Specifications
TOOLS REQUIRED (or equivalent)
^
J-39200, Digital multimeter.
INSPECTION
1. Check the routing of the wires, improper routing can cause a crossfire.
2. Check each wire for any signs of cracks or splits in the wire.
3. Check each wire for broken insulation and arcing.
4. Inspect the spark plug terminals for corrosion or damage. Replace spark plug(s), and wire(s) and inspect distributor cap if any of these conditions
are discovered.
MEASUREMENT
Measure the resistance of each spark plug wire (and the coil wire if equipped) with a J-39200 digital multimeter. Resistance should be
approximately 5,000 to 10,000 ohms per foot. If the resistance reads above 30,000 ohms (no matter how long the spark plug wire is), or fluctuates
from infinity to any value, replace the spark plug wire.
