chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Oxygen Sensor > < Diagram Information and Instructions|Page 4081
Page 1
background image

Manifold Pressure/Vacuum Sensor: Service and Repair

MAP Sensor Service

REMOVE OR DISCONNECT

1. Disconnect the negative battery cable.
2. Remove the bolts / screws (2)
3. Remove the electrical connector.
4. Remove the inlet vacuum hose.
5. Remove the MAP sensor from the bracket

INSTALL OR CONNECT

1. Installation the inlet vacuum hose.
2. Connect the electrical connector.
3. Position the MAP sensor to bracket and drive bolt/screws (2) securely seated and not stripped.
4. Connect the negative battery cable.

Oxygen Sensor > < Diagram Information and Instructions|Page 4081