Corvette V8-350 5.7L DOHC VIN J MFI (1990)
Ignition Control Module: Service and Repair
REMOVAL
1.
Disconnect negative battery cable.
2.
Remove intake plenum. (Refer to FUEL SYSTEMS)
3.
Disconnect DIS electrical connectors.
4.
Disconnect spark plug wires. (Note proper relationship of wires to coils).
5.
Remove DIS assembly to block bolts (3).
6.
Remove DIS assembly from engine.
Dielectric Grease Application
INSTALLATION
1.
Install DIS assembly to engine.
2.
Install DIS assembly to block bolts (3). Torque to 20-30 N-m (15-22 lbs ft).
3.
Connect spark plug wires to proper coils.
4.
Connect DIS electrical connectors.
5.
Install intake plenum. (Refer to FUEL SYSTEMS)
6.
Connect negative battery cable.