Corvette V8-5.7L VIN G (1997)
Front Fascia Replacement: Installation Procedure
INSTALLATION PROCEDURE
IMPORTANT:
^
If the vehicle has the fog lamp option ensure that the fog lamp opening filler has been removed from the fascia deflector.
^
If the vehicle does not have the fog lamp option ensure that the fog lamp opening filler has been installed to the fascia deflector.
1. Position the deflector to the fascia.
2. Install the bolts attaching the deflector to the fascia.
Tighten
Tighten the fascia deflector bolts to 2.5 N.m (22 lb in).
NOTE: Refer to Fastener Notice in General Information.
3. Install the fog lamp, if removed.
Front Fascia Lamp Deflector: Installation Procedure
4. Install the front fascia close out panel.
Emblem