Corvette V8-6.0L VIN U (2005)
IMPORTANT: The front hoist pads must not contact the rocker panels, the front fenders, or the floor pan.
Position the (frame contact) front hoist pads as follows:
-
Under or immediately forward of the front frame rail shipping slot reinforcements.
-
The long sides of the hoist pads parallel to the frame rails.
Rear Hoist Pads
IMPORTANT:
-
The rear hoist pads must not contact the rocker panels to the outside of the frame rail shipping slot reinforcements.
-
The rear hoist pads must not contact the floor pan.
Install the J 43625 into the rear frame rail shipping slots, lock into place and position the rear hoist pads as follows:
-
Under the J 43625.
-
The long sides of the hoist pads perpendicular to the J 43625.
VEHICLE LIFTING - SUSPENSION CONTACT HOIST
Front Lift
Position the (suspension contact) front lift under the outer edge of the front suspension lower control arms.
Rear Lift
Position the (suspension contact) rear lift under the rear tire and wheel assemblies.
VEHICLE JACKING
When you are lifting a vehicle with a vehicle jack or a service jack, block the wheels at the opposite end from which you are lifting. Use jack stands to
