Corvette V8-6.2L (2008)
Convertible Top Weatherstrip: Service and Repair
Weatherstrip Replacement (Coupe and Convertible)
Weatherstrip Replacement (Coupe and Convertible)
Removal Procedure
1. Open the driver and passenger side doors.
2. Remove the roof lift off panel (coupe) or lower the top (convertible).
3. Remove the push in retainers from the lower corners of the weatherstrip.
4. Remove the upper LH/RH corner screws from the weatherstrip.
5. Peel the rear edge of the weatherstrip forward to expose the windshield upper retainer screws.
6. Remove the upper retainer screws.
7. Remove the weatherstrip with upper retainer.
8. Clean the surface of old sealant material.
Installation Procedure