Corvette V8-6.2L (2008)
Coolant Reservoir: Service and Repair
Radiator Surge Tank Inlet Hose/Pipe Replacement
Radiator Surge Tank Inlet Hose/Pipe Replacement
Tools Required
J 38185 Hose Clamp Pliers
Removal Procedure
1. Drain the cooling system. Refer to Cooling System Draining and Filling (GE 47716) (See: Service and Repair)Cooling System Draining and
Filling (Static Fill) (See: Service and Repair) .
2. Remove the radiator support. Refer to Radiator Support Replacement (See: Radiator/Service and Repair) .
3. Disengage tension and reposition the surge tank inlet hose clamp at the surge tank using the J 38185 .
4. Disconnect the surge tank inlet hose from the surge tank.
5. Disengage tension and reposition the surge tank inlet hose clamp at the throttle body assembly using the J 38185 .
6. Disconnect the surge tank inlet hose from the air bleed pipe assembly.