Corvette V8-6.2L (2008)
Important: Rotate the DTM sensor clockwise to engage the sensor to the air duct.
3. Install the DTM sensors.
4. Connect the discharge temperature management (DTM) sensor electrical connectors.
5. Connect the wiring harness to the heater core cover wire harness retainer (1).
6. Connect the wiring harness to the heater core cover wire harness retainer (3).
7. Connect the HVAC module wiring harness retainer pin (2) to the HVAC module.
8. Install the HVAC module. Refer to HVAC Module Assembly Replacement (See: Heating and Air Conditioning/Housing Assembly
HVAC/Service and Repair) .