Corvette V8-6.2L (2008)
Push Rod: Service and Repair
Valve Rocker Arm and Push Rod Replacement
Removal Procedure
1. Remove the valve rocker arm covers. Refer to Valve Rocker Arm Cover Replacement - Left Side (See: Cylinder Head Assembly/Valve
Cover/Service and Repair/Valve Rocker Arm Cover Replacement - Left Side) or Valve Rocker Arm Cover Replacement - Right Side (See:
Cylinder Head Assembly/Valve Cover/Service and Repair/Valve Rocker Arm Cover Replacement - Right Side) .
Important: Place the valve rocker arms, valve pushrods, and pivot support, in a rack so that they can be installed in the same location
from which they were removed.
2. Remove the valve rocker arm bolts.
3. Remove the valve rocker arms.
4. Remove the valve rocker arm pivot support.
5. Remove the pushrods.
6. Clean and inspect the valve rocker arms and pushrods. Refer to Valve Rocker Arm and Push Rod Cleaning and Inspection (6.2L) (See: Service
and Repair/Overhaul)Valve Rocker Arm and Push Rod Cleaning and Inspection (7.0L) (See: Service and Repair/Overhaul) .
Installation Procedure
