Corvette V8-6.2L (2008)
4. Using a new oil seal (1) install the oil outlet hose (2) and bolt (3) to the oil pan.
Tighten the outlet hose to oil tank bolt to 22 N.m (16 lb ft).
5. Install the right front wheelhouse rear liner. Refer to Front Wheelhouse Liner Replacement (Rear Liner) (See: Body and Frame/Fender/Front
Fender/Front Fender Liner/Service and Repair)Front Wheelhouse Liner Replacement (Front Liner) (See: Body and Frame/Fender/Front
Fender/Front Fender Liner/Service and Repair) .
6. Lower the vehicle.
7. Change the engine oil. Refer to Engine Oil and Oil Filter Replacement (See: Engine Oil/Service and Repair) .