Corvette V8-6.2L (2008)
2. Install the intake manifold (500).
3. Apply a 5 mm (0.20 in) band of threadlocker to the threads of the intake manifold bolts (512). Refer to Sealers, Adhesives, and Lubricants (6.2L)
(See: Specifications/Sealers, Adhesives, and Lubricants)Sealers, Adhesives, and Lubricants (7.0L) (See: Specifications/Sealers, Adhesives, and
Lubricants) for the correct part number.
4. Install the fuel rail stop bracket (712).
5. Install the intake manifold bolts (512).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
6. Tighten the intake manifold bolts to the sequence below:
*
First Pass: Tighten the intake manifold bolts in sequence to 5 N.m (44 lb in).
*
Final Pass: Tighten the intake manifold bolts in sequence to 10 N.m (89 lb in).