Workshop Repair Manuals

Chevrolet Workshop Manuals

[PREV PAGE] [NEXT PAGE]

chevrolet Workshop Repair Guides


Corvette V8-6.2L (2008)

Lighting and Horns > Backup Lamp > Backup Lamp Switch > Component Information > Service and Repair

Page 1
background image

Backup Lamp Switch: Service and Repair

Backup Lamp Switch Replacement

Removal Procedure

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle  (See: Maintenance/Service Intervals) .
2. Remove the catalytic converters. Refer to Catalytic Converter Replacement - Left Side (6.0L)  (See: Engine, Cooling and Exhaust/Exhaust

System/Catalytic Converter/Service and Repair/Catalytic Converter Replacement - Left Side (6.2L))Catalytic Converter Replacement - Left Side
(7.0L)  () and Catalytic Converter Replacement - Right Side (6.0L)  (See: Engine, Cooling and Exhaust/Exhaust System/Catalytic
Converter/Service and Repair/Catalytic Converter Replacement - Right Side (6.2L))Catalytic Converter Replacement - Right Side (7.0L)  () .

3. Disconnect the backup lamp switch electrical connector.

4. Remove the backup lamp switch.

Installation Procedure

Notice:  Refer to Fastener Notice  (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .

1. Install the backup lamp switch.

Tighten the backup lamp switch to 20 N.m (15 lb ft).

2. Connect the backup lamp switch electrical connector.

Lighting and Horns > Backup Lamp > Backup Lamp Switch > Component Information > Service and Repair

[PREV PAGE] [NEXT PAGE]