Corvette V8-6.2L (2008)
Alignment: Service and Repair
Rear Toe Adjustment
Rear Toe Adjustment
1. Loosen the rear suspension adjustment link lock nut (1).
2. Rotate the inner tie rod (2) to the required toe specification setting. Refer to Wheel Alignment Specifications (See: Specifications) .
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Tighten the rear suspension adjustment link lock nut.
Tighten the rear suspension adjustment link lock nut to 65 N.m (48 lb ft).
4. Check the toe setting after tightening.
5. Adjust the toe setting if necessary.
