Corvette V8-6.2L (2008)
5. Connect the front evaporator inlet line to the condenser.
Notice: Refer to Fastener Notice .
6. Install the front evaporator inlet line to condenser bolt.
Tighten the bolt to 16 N.m (12 lb ft).
7. Lower the vehicle.
8. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging (See: Heating and Air Conditioning/Service and
Repair/Procedures/Refrigerant Recovery and Recharging) .
9. Leak test the fittings of the component using J 39400-A .