Corvette V8-6.2L (2008)
debris. A small amount of "friction" material in the bottom pan is a "normal" condition. If large pieces and/or metal particles are noted in the
fluid or bottom pan, flush the oil cooler and cooler lines and overhaul the transmission. If there are no signs of transmission internal damage
noted, replace the fluid filter assembly, repair the oil cooler, and flush the cooler lines.
*
Fluid that is cloudy or milky or appears to be contaminated with water indicates engine coolant or water contamination. Refer to Engine
Coolant/Water in Transmission (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Testing and Inspection/Symptom
Related Diagnostic Procedures/Engine Coolant/Water in Transmission) .
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
8. Replace the trans oil level check plug and tighten to 25 N.m (18 lb ft).
9. Inspect for external leaks. Refer to Fluid Leak Diagnosis (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Testing and
Inspection/Component Tests and General Diagnostics/Fluid Leak Diagnosis) .
10. Reset the oil life monitor only if the fluid was changed.
