Corvette V8-6.2L (2008)
4. Disconnect the front evaporator inlet line from the body retaining clip.
5. Disconnect the refrigerant pressure sensor electrical connector.
6. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Service Intervals) .
7. Remove the front evaporator inlet line to A/C condenser lower bolt.
Important: Immediately cap or tape the open A/C components immediately in order to prevent contamination.
8. Disconnect the front evaporator line inlet from the A/C condenser.
9. Remove and discard the sealing washer.
10. Cap or tape off the A/C condenser.
11. Lower the vehicle.