Corvette V8-6.2L (2008)
Hose/Line HVAC: Service and Repair
Compressor Hose Assembly Replacement
Compressor Hose Assembly Replacement
Tools Required
J 39400-A Halogen Leak Detector
Removal Procedure
1. Recover the refrigerant from the A/C system. Refer to Refrigerant Recovery and Recharging (See: Heating and Air Conditioning/Service and
Repair/Procedures/Refrigerant Recovery and Recharging) .
2. Remove the radiator support. Refer to Radiator Support Replacement (See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and
Repair) .
Important: Prior to removal, take note of the A/C compressor hose assembly routing and orientation between the compressor and
condenser.
Cap or tape off the open A/C components immediately to prevent system contamination.
3. Remove the A/C compressor hose assembly bolt from the A/C condenser fitting.
4. Disconnect the A/C compressor hose assembly from the A/C condenser fitting.
5. Remove and discard the sealing washer.
6. Cap or tape off the A/C condenser fitting.
