Corvette V8-6.2L (2008)
13. Remove cap or tape from the A/C condenser fitting.
14. Install a new sealing washer onto the compressor hose assembly. Refer to Sealing Washer Replacement (See: Heating and Air
Conditioning/Coupler HVAC/A/C Coupler O-ring/Service and Repair/Sealing Washer Replacement) .
15. Connect the A/C compressor hose assembly to the A/C condenser fitting.
16. Install the A/C compressor hose assembly bolt to the A/C condenser fitting.
Tighten the bolt to 16 N.m (12 lb ft).
17. Install the radiator support. Refer to Radiator Support Replacement (See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and
Repair) .
18. Recharge the A/C system. Refer to Refrigerant Recovery and Recharging (See: Heating and Air Conditioning/Service and
Repair/Procedures/Refrigerant Recovery and Recharging) .
19. Leak test the fittings of the component using J 39400-A .