Corvette V8-6.2L (2008)
Radiator Hose: Service and Repair
Radiator Outlet Hose Replacement
Radiator Outlet Hose Replacement
Tools Required
J 38185 Hose Clamp Pliers
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Drain the cooling system. Refer to Cooling System Draining and Filling (GE 47716) Cooling System Draining and Filling (Static Fill).
3. Disengage tension on the radiator outlet hose clamp at the radiator using J 38185 .
4. Disconnect the radiator outlet hose from the radiator.
5. Lower the vehicle.
6. Disengage tension on the radiator outlet hose clamp at the engine using the J 38185 .
7. Disconnect the radiator outlet hose from the engine.
8. Remove the radiator outlet hose.
Installation Procedure
Notice: Make sure the reference marks on the hoses and the radiator are lined up. A twist on the hose would place strain on the radiator fitting
which could cause the fitting to crack or break.
Important: Lubricate the inside diameters of the hose with clean coolant prior to installation.
1. Install the radiator outlet hose.
