Corvette V8-6.2L (2008)
Important: The front hoist pads must not contact the rocker panels, the front fenders, or the floor pan.
Position the (frame contact) front hoist pads as follows:
*
Under or immediately forward of the front frame rail shipping slot reinforcements.
*
The long sides of the hoist pads parallel to the frame rails.
Rear Hoist Pads
Important:
*
The rear hoist pads must not contact the rocker panels to the outside of the frame rail shipping slot reinforcements.
*
The rear hoist pads must not contact the floor pan.
Install the J 43625 into the rear frame rail shipping slots, lock into place and position the rear hoist pads as follows:
*
Under the J 43625 .
*
The long sides of the hoist pads perpendicular to the J 43625 .
Vehicle Lifting - Suspension Contact Hoist
Front Lift
Position the (suspension contact) front lift under the outer edge of the front suspension lower control arms.
Rear Lift