Corvette V8-6.2L (2008)
3. Install the sensor nut and position the sensor body parallel to the inside wheel surface while torquing.
Tighten the nut to 7 N.m (62 lb in).
Important: To avoid tire pressure sensor damage when mounting the tire back on the wheel, ensure a tolerance is maintained between
the tire machine, or irons, tire bead, and the sensor.
4. Install the tire on the wheel. Refer to Tire Mounting and Dismounting (See: Tires/Service and Repair/Procedures/Tire Mounting and Dismounting
) .
5. Install the tire and wheel assembly on the vehicle. Refer to Tire and Wheel Removal and Installation (See: Service and Repair) .
6. Lower the vehicle.
7. Learn the tire pressure sensors. Refer to Tire Pressure Sensor Learn (See: Service and Repair) .