Corvette V8-6.2L (2008)
10.
Using the tire machine, rotate the tire/wheel assembly clockwise when transferring the tire bead to the inside of the wheel rim.
11.
Position the rim so that the valve stem (1) is situated at the 3 o'clock position relative to the head (2). This will protect the sensor when the bottom
bead seats.
12.
After the bottom bead is on the wheel, reposition the wheel and tire so that the valve stem is situated at the 9 o'clock position relative to the head.
This will protect the sensor while mounting the tire bead to the outside of the wheel.
