Workshop Repair Manuals

Chevrolet Workshop Manuals

[PREV PAGE] [NEXT PAGE]

chevrolet Workshop Repair Guides


Corvette V8-6.2L (2008)

Powertrain Management > Computers and Control Systems > Fuel Level Sensor > Component Information > Service and Repair > Fuel Level Sensor Replacement - Left Side

Page 1
background image

Fuel Level Sensor: Service and Repair
Fuel Level Sensor Replacement - Left Side

Fuel Level Sensor Replacement - Left Side

Removal Procedure

Important:  DO NOT handle the level sender on the resistor card. Oils from human contact can damage the card.

1. Remove the module from the fuel tank. Refer to Fuel Tank Fuel Pump Module Replacement - Left Side  (See: Fuel Delivery and Air

Induction/Fuel Pump/Service and Repair) .

2. Press on the 3 connector position assurance (CPA) lock tabs (1) and slide downward.
3. Disconnect the electrical connector from the module. 
4. Remove the sender wires from the connector.

Powertrain Management > Computers and Control Systems > Fuel Level Sensor > Component Information > Service and Repair > Fuel Level Sensor Replacement - Left Side

[PREV PAGE] [NEXT PAGE]