Workshop Repair Manuals

Chevrolet Workshop Manuals

[PREV PAGE] [NEXT PAGE]

chevrolet Workshop Repair Guides


Corvette V8-6.2L (2008)

Powertrain Management > Computers and Control Systems > Manifold Pressure/Vacuum Sensor > Component Information > Service and Repair

Page 1
background image

Manifold Pressure/Vacuum Sensor: Service and Repair

Manifold Absolute Pressure Sensor Replacement

Removal Procedure

1. Remove the oil filler cap (1).
2. Remove the right engine sight shield (2).
3. Remove the manifold absolute pressure (MAP) sensor (4).
4. Disconnect the electrical connector (3) for the MAP sensor.

Installation Procedure

1. Reconnect the MAP sensor electrical connector (3) to the engine wiring harness.
2. Install the MAP sensor (4).
3. Install engine sight shield (2).
4. Install the oil filler cap (1).

Powertrain Management > Computers and Control Systems > Manifold Pressure/Vacuum Sensor > Component Information > Service and Repair

[PREV PAGE] [NEXT PAGE]