Workshop Repair Manuals

Chevrolet Workshop Manuals

[PREV PAGE] [NEXT PAGE]

chevrolet Workshop Repair Guides


Corvette V8-6.2L (2008)

Powertrain Management > Computers and Control Systems > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram Information and Instructions > Page 4625

Page 37
background image

3. Depress the spring loaded locator of the crimping tool until the terminal holder is completely visible.

4. Insert terminal into the appropriate terminal holder until it hits bottom and stops. The correct terminal holder is determined by the wire size. Also

ensure that the terminals wings are pointing towards the former on the tool and the release locator.

5. Insert the stripped cable into the terminal. Insulation should be visible on both sides of the terminal insulation wings.
6. Compress the handles until the ratchet automatically releases.
7. Place the terminal into the appropriate cavity and assemble the connector.

Delphi Connectors (Micro-Pack 100W)

Delphi Connectors (Micro-Pack 100W)

Tools Required

J-38125 Terminal Repair Kit

Terminal Removal Procedure

There are 2 styles of Micro-Pack 100W connectors. These connectors are very similar but use different terminals and have some minor physical
differences also. 

Powertrain Management > Computers and Control Systems > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Diagrams > Diagram Information and Instructions > Page 4625

[PREV PAGE] [NEXT PAGE]